DIY Guide: How to Build a TV Stand with a Fireplace

  • Ella Jubaedah
  • Jun 24, 2023
DIY Guide: How to Build a TV Stand with a Fireplace

Materials and tools needed for a DIY TV stand with fireplace

Are you planning on upgrading your TV stand and adding a cozy fireplace to your living room? Here are the materials and tools you will need to create a DIY TV stand with fireplace.


  • Fireplace insert
  • 1-2 pieces of 4×8 plywood sheets
  • 1×3 or 1×2 lumber for framing
  • Wood screws
  • Nails
  • Wood glue
  • Sandpaper
  • Stain or paint
  • Fireproof insulation
  • Wood veneer edge banding
  • Pre-made metal legs or 2×4 wood lumber
  • Wood putty or filler


  • Tape measure
  • Table saw or circular saw
  • Miter saw or miter box and handsaw
  • Drill
  • Hammer
  • Nail gun
  • Screwdriver
  • Sander or sanding block
  • Paintbrush or roller
  • Wood router
  • Circular saw or jigsaw for cutting the fireplace insert opening

Detailed Explanation of Tools and Materials

Fireplace insert is an essential part of your DIY TV stand with a fireplace. You can buy a pre-made electric fireplace insert at any hardware store or online that comes with a built-in heating system and LED flames. Electric fireplace inserts are easy to install, affordable and don’t require any chimneys or gas lines. You can also choose the size and style of your electric fireplace insert based on your TV stand design.

You can create a TV stand frame using 1×2 or 1×3 lumber sizes. The frame will help to hold the plywood sheets together. Once you have the base frame, you can attach the plywood sheets to the frame using wood screws. Make sure to sand the plywood before attaching it to the frame to remove any bumpy or rough areas. Cut an opening on one side of the plywood sheet based on the fireplace insert dimensions.

After attaching the plywood sheets, it’s time to add finishing touches. Stain or paint the plywood to match your living room decor. You can also use wood veneer edge banding to cover up the plywood edges for a finished look. Place the fireplace insert into the cutout opening, and add fireproof insulation around it for safety purposes.

If you are not going to use pre-made metal legs, you can use 2×4 wood lumber to create your TV stand legs. Cut four equal sizes and attach them to the bottom of the frame using wood screws or a nail gun. Sand and paint the legs to match your TV stand’s color.

Fill any nail holes or gaps on the TV stand surface with wood putty or filler. Let it dry, then sand the surface until it’s even. You can also add custom designs or engravings to your TV stand using a wood router.

Finally, it’s time to assemble your DIY TV stand with a fireplace, plug-in the electric fireplace, and turn it on to enjoy the warm flames.

Good luck with your DIY project!

Choosing the Right Location for Your DIY TV Stand with Fireplace

Adding a fireplace to your living room may seem like a daunting task. Not only do you need to find the perfect location for it, but you also have to consider how it will affect your TV placement. Fortunately, there are several ways to incorporate a fireplace into your DIY TV Stand without sacrificing style or comfort.

One of the first things that you need to consider is the placement of your DIY TV Stand with the fireplace. You want to ensure that the location is appropriate and that your TV and fireplace do not interfere with each other. Here are a few things to keep in mind when choosing the right location for your DIY TV stand with a fireplace:

The Size of Your Room

The size of your room plays a significant role in finding the perfect location for your DIY TV Stand with the fireplace. In small rooms, you want to consider placing the stand against a wall that is opposite to a window, or you can mount it in a corner. However, in large rooms, you have more flexibility with positioning the stand.

You can choose to place it against a wall and install the fireplace in the middle while mounting the TV above it. Alternatively, you could set the DIY TV Stand with the fireplace in a centric position while arranging seating around it, and set up the remaining furniture to fill in the gaps of the room. Either way, the size of your room should be the first consideration.

The Height of Your TV and Fireplace

The height of the DIY TV Stand with the fireplace is also a crucial factor to consider. You want to ensure that the height of both the TV and fireplace is not too high or too low to watch from your seating position.

Usually, the best height for the TV is at eye level when sitting down, about 44-55 inches off the floor. You can mount the TV on the DIY TV Stand or use a tilting bracket that can lower or raise depending on your seating position. As for the fireplace, you should place it at least three feet off the ground for safe and comfortable use.

The Type of Fireplace

The type of fireplace that you choose also be a factor in terms of the location of your DIY TV Stand. If you opt for a freestanding fireplace that could heat up the entire room, then you might want to position your DIY TV Stand along the opposite wall.

On the other hand, if you go for a wall mounted, electric fireplace that doesn’t emit heat, then you can install it within the TV stand itself without interfering with the electronics. It’s a good idea not to mix fireplace types if you are thinking about mounting it on the stand.

The Safety Concerns

Safety should be a primary concern when considering the location of your DIY TV Stand with the fireplace. Make sure that the stand is placed away from flammable objects, such as curtains, decorative items, and furniture.

If you have children or pets, make sure that the fireplace is secure and is not a hazard. You might want to consider a DIY TV Stand with a glass door, so you don’t have to worry about floor debris and wood chips. Better yet, if you plan on heating the fireplace, you can place a screen around it.

The Aesthetic

Last but not least, you want to consider the aesthetic of your living room when choosing the location of your DIY TV Stand with the fireplace. You want the TV stand and the fireplace to complement each other and not clash with the rest of the room’s décor.

You can choose a DIY TV Stand with a modern design if your interior design has a minimalist feel or opt for a more rustic look if you have woodsy, natural elements stacked around the living room. You can then choose the right location based on the ambiance that you are going for, it’s one way to make it blend with the rest of the space.

In conclusion, finding the right location for your DIY TV Stand with the fireplace may take some time, but with these factors in mind, it shouldn’t be too difficult. Remember that your living room should not only look good but also be functional and safe.

Step-by-step instructions for building a DIY TV stand with fireplace

Are you tired of your boring, plain old TV stand? Do you want to add some warmth and coziness to your living room? Why not build your own TV stand with a fireplace! This DIY project can be done in just a few simple steps.

Materials Needed

The first thing you’ll need to do is gather all of the materials you’ll need. You’ll need:

  1. Two sheets of 3/4-inch plywood
  2. Two sheets of MDF board
  3. Four 4×4 wooden posts
  4. One 2×6 board
  5. Two 1×3 boards
  6. Twin wall polycarbonate sheets
  7. Electric fireplace insert
  8. Tools: Saw, drill, screws, wood glue, wood filler, sandpaper, paint or stain

Step 1: Cut the wood

The first step is to cut the wood to the appropriate size. Cut two pieces of plywood to the size of your desired TV stand. Cut two pieces of MDF board to the same size. Cut the 4×4 posts to the height you want your TV stand to be and cut the 2×6 board to the length of the TV stand.

Step 2: Assemble the frame

Next, you’ll assemble the frame of the TV stand. Place the plywood pieces on the ground, and then glue and screw the 4×4 posts to the corners of the plywood. Cut the 1×3 boards to the length of the plywood, and then glue and screw them to the top and bottom of the posts to create a frame around the plywood. Then, repeat the process with the other plywood and MDF board to create the back of the TV stand.

Step 3: Add the fireplace

Now it’s time to add the fireplace to your DIY TV stand. Take your twin wall polycarbonate sheets and cut them to fit the back of the TV stand. Cut a hole in the sheets for the electric fireplace insert. The sheeting should be attached behind the frame (between the plywood and MDF board). The fireplace insert should then be placed into the hole, leveled and attached to the frame.

Now you can add some finishing touches to your TV stand. Fill any holes or gaps with wood filler, sand the surface of your stand until it’s smooth, and paint or stain to your desired color. And that’s it! You now have a beautiful DIY TV stand with a cozy fireplace built right in!

If you’re feeling extra creative, you could also add some shelving or drawers to your TV stand to customize it even more. Regardless of how you choose to finish your TV stand, this DIY project is sure to make your living room feel more inviting and cozy than ever before.

Adding finishing touches to your DIY TV stand with fireplace

After putting in the time and effort to build your very own DIY TV stand with fireplace, you’ll want to add the finishing touches to make it stand out and complement the décor of your home. Here are some ideas to consider:


Your TV stand with fireplace can become an integral part of the style of your room. To create a cohesive look, accessorize your DIY TV stand with elements like statement lamps, artwork, and decorative objects. Consider incorporating decor with textures like velvet or cozy knit blankets to add warmth and texture to the space. This can help bring color and life to the space while adorning your TV stand in a stylish way. Be careful not to clutter your space, though. Too many additions can be overwhelming and undermine the balance you are trying to create.

Hide the cords

A TV stand with many cords for other electronics can look a bit messy, and it can detract from the beauty of the furniture. To avoid having a jumbled mess of cords around your TV stand with fireplace, initiate cable management that will help you cover the cables. You can start by utilizing cable clips and tubes to tidy up your cables and keep them away from eyesight. This can help make your DIY TV stand look more professional and polished.

Bring about the greenery

Introducing plants or flowers into your home can be a fantastic addition since they boost air quality and offer psychological benefits. Flower vases or even potted plants can help create a cozy and inviting set-up for your TV stand with fireplace. Adding greenery can help soften the look of your tv stand and add a natural pop of color to your home. They can both balance the aesthetics of your DIY TV stand with the surrounding elements in the room, creating a cohesive, wholesome environment.

Shine bright with lighting

Your TV stand with fireplace can become a focal point in your room, and lighting design can help accentuate it. Pendant lights or ceiling lights can transform your DIY TV stand’s look and feel and its role in the room. Install a lamp or string lights around your TV frame or above your TV stand to give a chic glow to the space. Another way to highlight your TV fireplace is by adding a pair of sconces to the wall space on either side of the mantel. Keep in mind that balancing scale and proportion is critical when choosing the size of your lighting fixtures.

Include storage

In addition to your TV and the fireplace, storage can be combined into the design of your DIY TV stand. Keep your living area organized by adding baskets, shelves, and cabinets. Baskets can conceal items that are not decorative, while elegant shelves exhibit art and knick-knacks. Cabinets are ideal for hiding blankets or other items that may clutter the space. By incorporating storage into your DIY TV stand with fireplace, the piece becomes not just decorative furniture but utilitarian as well by being able to store piles of clutter and helps you easily keep things organized.

With these different ideas, you can add the finishing touches to your DIY TV stand with fireplace to match your personal taste, making it a piece that is sure to stand out in any room. Happy DIYing!

Maintenance tips for keeping your DIY TV stand with fireplace in good condition

Now that you have successfully built your own DIY TV stand with a fireplace, it is important to take good care of it to ensure it lasts for many years to come. Regular maintenance will also help keep it looking great and functioning properly. Here are some maintenance tips for your DIY TV stand with fireplace:

1. Keep it clean

The first step in maintenance is to keep your DIY TV stand with fireplace clean. Dust and dirt can accumulate on the surface and in the crevices of the stand, affecting the quality of the finish or the fireplace. Regularly dusting with a soft cloth or a vacuum cleaner attachment can remove the dirt, while a mild soap and water solution can be used to clean the fireplace glass or any other glass components. Be sure to dry it completely to avoid water spots.

2. Check for loose screws or bolts

Another important maintenance step is to regularly check for any loose screws or bolts that may have become loose during use. Use a screwdriver to tighten any loose screws or bolts and ensure the stability of the stand.

3. Inspect the fireplace’s chimney

If your DIY TV stand has a chimney for the fireplace, it is important to regularly inspect it for any blockages or debris that may have accumulated over time. Use a flashlight to look through the chimney and remove any debris such as debris, leaves, or animal nests that could hinder proper airflow. A clogged chimney can prevent heat and smoke from being adequately released, leading to damage or even fire.

4. Check the fireplace components

It is essential to test all fireplace components, such as the igniter, on/off switch, blower, and flame settings, to ensure they are working correctly. If a component is malfunctioning, it can lead to inadequate heat, or worse yet, an electrical fire in the fireplace. If you identify any broken or worn-out components, it is best to replace them immediately.

5. Store it correctly

When the season ends and it comes time to put away your DIY TV stand with fireplace, it is important to correctly store it. Assemble it correctly, then cover it with a tarp or other protective material to keep it safe from dust and moisture. Find an area that is cool and dry, avoiding damp basements or garages where moisture can build up over time. With proper storage, you can ensure that your DIY TV stand with fireplace will remain in excellent condition for many years and seasons to come.

With these simple maintenance tips, you can ensure that your DIY TV stand with fireplace remains in good working condition for many years. Regular cleaning, checking for loose screws, and inspecting the chimney and components will help keep your DIY TV stand with fireplace functioning safely and efficiently. Proper storage during the off-season will also help ensure that it remains in the best possible condition. Stay cozy and warm with your DIY TV stand and fireplace all year round!

Related Post :

Leave a Reply

Your email address will not be published. Required fields are marked *